HFC-1001 Liquid PCE Superplasticizer
Grade-specific technical review · Original source available below
HFC-1001 is described in the supplied product data sheet as a liquid polycarboxylate-ether high-performance water reducer, particularly for precast concrete requiring early strength, high flow and good surface finish. This grade belongs to the liquid PCE family, not to cement grinding aids or a standalone accelerator category.
Application fit
The sheet lists precast, high-early-strength, high-flow, self-compacting, high-strength and ready-mix concrete. It generally does not recommend long-distance transport. Evaluate the actual workability window rather than assuming slump-retaining performance from the generic liquid-PCE family.
Use plant materials to compare initial flow, retention, air, setting, early strength and surface quality. The sheet presents potential benefits; this page does not guarantee a strength gain, curing-energy saving or mold-turnover improvement.
Supplier-reported properties
| Physical form | Liquid |
|---|---|
| Colour | Pale yellow |
| Specific gravity | Approximately 1.04; reference conditions not specified |
| pH | Approximately 4.5 |
| Solids content | Not stated in this supplied sheet; request the grade-specific value |
| Storage / shelf life | The sheet states 5–40°C and 12 months in original sealed packaging |
| Packaging | The sheet lists 25 kg, 200 kg and 1,000 kg drums, or bulk; confirm current availability |
These are values reported in the supplied sheet, not batch COA results or independently verified acceptance limits.
Dosage and compatibility boundaries
The sheet gives a dosage range of 0.6–2.2% and a usual range of 0.8–1.2%, but does not identify the mass denominator or product-versus-active-solids basis. Confirm those fields before using these percentages. Do not transfer the generic family-page solids content to HFC-1001.
The sheet advises addition to mixing water or already-wetted concrete, not directly to dry concrete constituents, and separate dispensing equipment. It states incompatibility with BNS-series superplasticizers and references a designated air-entraining agent without identifying its grade. Obtain written confirmation and test the complete admixture combination.
Use the PCE dosage calculator only after the dosage basis and required concentration are confirmed. The compatibility guide helps organize trial comparisons.
Packaging and order requirements
Discuss your required container type, shipment quantity and customer label with our sales team. Final packaging, availability and labelling are confirmed in the quotation and order specification. Containers shown above are illustrative, not a commitment to a particular supply format.
Liquid PCE for concrete production
A practical sequence for planning your trial, not a site-specific installation drawing.
Original document and review status
Original product data sheet (Chinese PDF). Uploaded unchanged for technical review on 9 October 2026. This is a supplied product-description document, not a batch COA or independent certification.
The original PDF uses HuahaiFeifei, ViscoCrete and SCCC names in different sections. This page uses the grade identifier HFC-1001 without asserting a brand authorization or equivalence. No document revision/date is established here. Confirm the issuer, approved product name and current revision. The sheet mentions GB 8076-2008 and ASTM C494 Type A/F; no supporting conformity report has been supplied with this upload.
See the document centre for the distinction between TDS, SDS, batch and application evidence.
Request grade-specific confirmation
Send your binder composition, concrete application, target flow, retention time, temperature and early-strength requirement. Ask for the current approved HFC-1001 TDS, SDS, solids content, dosage basis and shipment-specific COA.